3 posts tagged with "clim"

We partnered again with Bauer-Modelle during the development of the VSP demo kit, taking care of the electronic part.

Under hood there is a proportional signal generator which picks up the analog signal from two Hall-effect-sensor equipped sticks and two industry grade potentiometers.

The signal then passes into our ring limiter and is computed, then the processed proportional signals powers the Voith-Schneider Propellers.

The VSP demo kit will be visible at Voith SE in Heidenheim on October 4, 2022.

Our new project PODControl will expand the functions of the CLIM Pro, adding the possibility to control bowthrusters and an eventual bow mounted Azipod like the one found on the EDDA FLORA.

It will give the full control of the Azipod like lowering, retracting, rotating, RPM. The controls are fully integrated with the CLIM Pro so you will achieve everything by using at least 5 channels.

The PODControl controller will be connected by wire with the CLIM Pro, giving the possibility to accomodate it wherever needed. Many parameters are customizable through the serial port.

We got mentioned on the prestigious german magazine ModellWerft edition 08/2022.

In the 05/2022 edition you will also find an article about Bauer-Modelle's Biene tug which implements our ring limiter in it's close-to-unique single VSP configuration. More about that gorgeous tug here.